Through this tutorial you become familiar with developing a Python application with a graphical userinterface. We will create an App which draws some basic shapes. The color of one or more of the shapes can be changed by entering a RGB color value (three numbers), for the color components red, green and blue. These numbers … Continue reading Learn Python: drawing shapes in a userinterface
In this tutorial you learn to build a temperature sensor and connect it via Bluetooth with an App. It uses a DHT11 temperature & humidity sensor and Bluetooth communication with your phone. For this we will use a Raspberry Pi Pico W, the Wireless edition of the Pico. It consists of the following steps: This … Continue reading Tutorial: build a connected temperature sensor with a Raspberry Pi Pico W
This short tutorial introduces the VL53L1X Time-of-Flight (ToF ) distance sensor and hook it up to an Arduino Nano. Further directions: If you bought it like this: You will first have to solder the header pins. Connect the sensor Because the sensor uses I2C its wiring is simple: It’s operating voltage is 3.3V or 5V, … Continue reading Using the VL53L1X Time-of-Flight Distance Sensor